SharkBite® Connection System™
SharkBIte Connection System

SharkBite® Slip Coupling

The SharkBite® Slip Coupling simplifies repair by doing the job that two couplings and extra pipe used to do. Only one end of the coupling has a stop, allowing the other end to slide freely over the end of a pipe. The fitting can be released with a disconnect tool and slid back onto the other end of the pipe for successful leak repair.

Applications:

Repair copper tubing or pipe. Note: Slip couplings should only be used on copper.

Sizes:

Approvals:

The SharkBite® Push-Fit Fittings have been design certified and listed to ASSE 1061/NSF 61. The SharkBite® Push-Fit Fittings are listed by IAPMO and are certified for potable and hydronic heating water distribution (Note: Glycol mixture for hydronics is not to exceed 50% concentration). The SharkBite® Push-Fit Fittings have been certified for underground applications and as a manufactured joint without access panels and they meet UPC, IPC and Canadian Plumbing Code requirements.

SharkBite® is now approved to the new ASSE 1061 standard for Push-Fit fittings.

The Datasheets provided are in Adobe's® PDF format. You will
need the free Acrobat plug-in
to view them. Get It Now.

 

Need Help?
Contact our knowledgeable sales staff, and we will help you find exactly what you need. Call us Toll Free at 1-877-700-4242 or